UNDERBASH INSTALL INSTRUCTIONS
Things You Will Need
- 4mm hex tool
- 5mm hex tool
Assembly time, approximately 10-15 minutes. Difficulty: Easy.
STEP 1:
Hold backplate directly against ISCG05 tabs. Check for clearance between the back side of the bashplate and the bike frame (use included 2.5mm spacers if necessary to space the backplate away from the frame).
STEP 2:
Rotate backplate to desired location and torque bolts to 5Nm
BASH REPLACEMENT INSTRUCTIONS
STEP 1:
Remove Underbash from bike
STEP 2:
Remove bolt retaining clip from rear bash plate bolt by pushing a 4mm hex through the bolt from the backside of the Underbash.
STEP 3:
Remove Bash bolts using a 5mm hex
STEP 4:
Select desired bash plate and reinstall bash bolts to 6Nm
STEP 5:
Reinstall bolt retaining clip on the rear bash plate bolt
STEP 6:
Reinstall Underbash onto bike