Great product
"Great tool and easy to install. Would highly recommend to anyone looking for a tool to take on the trail."
EDC Threadless Carrier
Your Mobile Toolbox.
The Threadless Carrier is one piece of lightweight aluminum that keeps your EDC V2 Tool and a Plug Kit in your stem. EDC Tool not included.
Easy to Install.
It takes less than 10 minutes to turn your steerer tube into a portable workshop. Just remove the start nut, drop in the carrier and bolt it in place.
FAQ
Will the threadless carrier fit my Fox 38 fork?
The Threadless carrier is only comptible with Fox 38 Performance Elite & Factory series forks that have a steerer tube longer than 245mm.
I went to install my threadless carrier, and it stops before fully inserting into my steerer tube?
If the threadless carrier will not fully insert into your fork, then it is likely that the length of your steerer tube is less than the minimum requirement. Please double check your steerer length and compare it to our compatibility list before proceeding.
My tool does not fully insert into the threadless carrier?
There are three possibilities for this:
1. Make sure the middle O-ring has been removed from the EDC tool system.
2. Is the mutli tool oriented correctly within the EDC tool body? If it is backward and not meshing will the tire lever, the tool will bulge and will not fit into any holder.
3. Check the steerer tube length, if you there was any force required during installation of the carrier then it is likely under pressure and flexing. This means your fork steerer length is too short, or it is an incompatible fork.
Will the threadless carrier fit in a fork with a straight steerer?
It is possible with some pre-requisite checks.
1. Steerer ID meets the compatibility requirements for the Threadless carrier (Min ID: 24.25mm)
2. Steerer does not neck internally at any point. You can check this by running a straight edge down & against the internal wall of your steerer. If it deflects then it necks and is not compatible.
3. Steerer is within our compatible length range. 185mm-265mm
4. Your current Top cap will need to replace the 1-1/2 plug supplied with our Threadless carriers. So check that the top cap fits flush without rocking, in the underside of the fork steerer.
If you can confirm all of these requirements are good then you should have no issue installing our threadless carrier in your straight steerer fork.
Will the EDC Threadless carrier work in carbon steerers?
Unfortunately, none of our EDC options are compatible with forks with carbon steerer tubes.
Can you fit the plier and plier kit in the threadless carrier?
The plug and bacon strips with fit within the small storage capsule and then fit into the threadless carrier. The Pliers, the large storage capsule or a c02 cartridge do not fit in the threadless carrier.
How do I use the chainbreaker?
The chainbreaker is mounted to the tire lever. Using the T25 in the multi tool, loosen the chainbreaker and rotate it perpendicular to the tire lever. Using the 3mm in the multi tool, back the pin off, then you can position the tool around the chainlink and thread to pin back in until you have broken the chain!
Reviews
Overall rating: 4.7391305 / 5 from 161 reviews.
AI Generated Review Summary
The EDC Threadless Carrier is praised for its easy installation, smooth fit, and outstanding quality. Customers appreciate the fast access to the EDC tool and the convenience of storing it in their handlebars. The product is also noted for its great appearance and ease of use.
Summary topics
- Star Nut Removal: 4%
- Product Appearance: 10%
- EDC Tool Carrier: 6%
- EDC Tool Access: 4%
- Overall System: 4%
Review topics: ["fit","quality","looks","issues","color","design","improvement","post","finish","instructions","setup","works","build","support","tool","install","carrier","access","system","cap","nut","buy","tube","holds","solution","idea","kit","container","addition","machining"].
Review highlights
- "Nice smooth fit, little gold accent looks great." —
- "I’m really pleased with my edc tool and thread less carrier." —
- "Great compact tool, hard installation" —
Reviews
Nice, but too long in my opinion
"This is a great piece of kit and solves the problem of carrying a multi tool, or really forgetting a multi tool. Good quality and have used others on another bike. My only complaint is it is too long and requires too long a steerer tube, They should make a shorter version by like 20 millimeters so you don't need a 190mm steerer tube."
EDC Threadless Carrier
"Knocked off a star because the larger storage tube won't fit with the threadless carrier. Otherwise the installation was very straightforward and it seems like a solid product."
Install was easy and works
"Install was easy and works as advertised. Well made product"
Easy tool holder in the classic green
"So easy to use and reminds me of bmx parts."
Great quality. Straightforward installation
"Great quality. Straightforward installation"
It was a present for
"It was a present for my son who is very happy with it."
Easy to install and a
"Easy to install and a great way for carrying tools"
I like the design so
"I like the design so much, I put it on all my bikes! Purchased a new bike and purchased another kit to install on it."
EDC Carrier
"Fit and finish are amazing. Easy install and fast shipping."
Q&A
- Is there a way i could use a edc carrier to set my bike up for barspins? And if so which one would be the best for that
- Hey Baz, the best EDC carrier for this would be the threaded one. Sounds like a sweet build!
- Will this work on a rockshox lyrik
- Hey Noah, I can't say for certain. Please check in with our EDC calculator here - https://can.oneupcomponents.com/pages/edc-fork-calculator-compatibility
- Does the threadless edc or edc lite compatible with a SR Suntour XCM 32 boost fork? From a steer tube length, diameter and material stand point it should work. The Oneup compatibility chart says nothing is compatible. Is there another reason? Just want to make sure nothing critical gets damaged. Thanks
- Hey Ryan, thanks for checking in. We haven't tested suntour forks yet so I can't say for certain if it will work or not. Have you checked our fork compatibility page yet? This could help give a better sense if it will wok or not. https://www.oneupcomponents.com/pages/fork-compatibility
- Can you install an EDC Threadless Carrier in a carbon Giant Revolt gravel bike steerer tube?
- Hi Robbie, Thanks for your message, I'm happy to help. That's not possible sorry as most carbon forks don't have access to the steerer tube from the bottom (crown) side which is required for the Threadless Carrier to work. Please let me know if there's anything else I can help you with. Cheers,
- Could I run my front brake hose through this for barspins on the trail bike?
- Hey Nathan. Thanks for your message, I'm happy to help. The Threadless Carrier doesn't have a hole all the way through it, although you could modify it (not officially recommended). Our Threaded Top Cap would be a better option for you as it does allow for hoses to be routed through the steerer tube. Hope this helps, please let me know if there's anything else I can do for you. Cheers,
