Pédales aluminium

Léger.
Avec un poids de seulement 386 g, les pédales OneUp en aluminium ne vous ralentiront pas dans les montées. Leur conception durable ne vous décevra pas non plus.

Mince et convexe.
Le profil ultrafin et subtilement convexe vous offre plus d'adhérence en laissant les pédales reposer dans la voûte plantaire naturelle de votre pied et réduit considérablement les risques d'accrocher une pédale sur un obstacle.

Grande plateforme.
L'immense plateforme de 115 x 105 mm comporte 10 picots de chaque côté pour vous maintenir en place sur les sentiers les plus accidentés et fournir plus de puissance dans les montées.
Reviews
FAQ
What is the Oneup Components Aluminum Pedal?
The Oneup Components Aluminum Pedal is a lightweight and durable platform pedal designed for mountain biking. It features a slim profile and a concave platform that provides superior grip and control.
What materials are used to make the Oneup Components Aluminum Pedal?
The pedal is made from aluminum and features a steel axle and stainless steel pins.
How much does the Oneup Components Aluminum Pedal weigh?
The pedal weighs in at only 386 grams (pair), making it one of the lightest pedals on the market.
Are these pedals compatible with SRAM & Truvativ carbon cranks?
Yes, but installation of OneUp Alloy pedals on SRAM carbon cranks does require extra care. During installation, Make sure when you tighten the pedals onto the crank that the pedal body or rubber washer do not contact the crank before the axle is torqued to 35Nm. The pedal should rotate without excessive drag and there should be a small gap between the pedal body and the crank. If the pedal contacts the crank before the axle is tight, try installing 1 extra pedal washer to space the pedal away from the crank. Do not add more than 1 extra pedal washer. If your pedals are rubbing on the crank or are not free spinning once torqued down then we do not recommend using these pedals with your carbon cranks. If you have any questions or trouble with this installation, please email us at support@oneupcomponents.com.
Can you reduce the height of the pedal pins?
These pedals are designed to have quite aggressive pins for maximum grip. Our pedal pin & washer kit comes with 0.5mm washers, to reduce them slightly.
My new pedals are squeaking, whats going on?
This noise can occur if greasing the rubber seal was missed during installation. If so, it is super quick to resolve. The steps are as follows:
- Remove the pedal from the crank.
- Remove the flange washer (3) and rubber seal (7) from the pedal axle (8).
- Separate the flange washer and rubber seal.
- Clean both and add a small amount of grease to the inside of the rubber seal, both where it contacts the flange washer & the pedal lock ring (4).
- Reinstall them onto the pedal axle in the same orientation.
- Install the pedal to the crank and give it a go!
Also if a visual aid will help, here is the link to the Alloy Pedal exploded view.
If your pedals continue to squeak, please email support@oneupcomponents.com
Are these pedals compatible with crankboots?
These pedals are compatible with crank boots with some modification to the boots. You can, if you want to run crankboots, trim the hole to clear the outer diameter of the pedal body. Be sure that the pedal rotates freely and does not contact the crankboot before riding.
How regularly should I service these pedals?
It is recommended to service your pedals a minimum of once a year. If you ride more than 3 days a week then more regular servicing is ideal.