A Mobile Toolbox.
The 100cc EDC Pump’s hollow body is designed to store the 20-function EDC Tool and Plug + Plier Kit inside. With the EDC Pump you’ll have all the tools all the time.
Compact & Lightweight.
At 100cc and 160g, the EDC Pump has the highest volume to weight ratio of any pump on the market. The larger volume is great for extra storage and higher pressures. Toss it in your pack and hit the trails or the backroads.
Easy-On Pump Head
Push it on, pump it up, pull it off. Our pump head supports the valve stem to avoid bending, breaking or unseating the valve. Plus, no threading means no chance of unscrewing your valve core when you remove the pump.
Not only will you have your pump, you will have all of your tools.
A nicely integrated unit that’s easy to swap between bikes.
Extremely useful as well as durable..
All the tools you need in one handy spot.
I got the multi tool and pump, why does the tool rattle in the pump?
The multi tool is just one part of a whole. It is designed to be held captive within the EDC tool system. That complete tool can then be inserted into the pump and everything will be held nice, quiet and compact. Here is a link to the complete EDC tool system.
Do you sell replacement pump straps?
Yes! We have three packs of pump mount straps available in the EDC small parts section of the website.
Why is the tool hard to remove form my pump?
It is likely that the top O-ring is dry. Best thing to do is rub a small amount of grease onto the o-ring and re-install it. If that does not help, please email us at firstname.lastname@example.org.
What is the max the pump mount can be spaced from the bolt? WIll this fit my Wide down tube?
The pump mount has a max extension of 30mm from the center of the mounting bolts.
My pump handle is extending while riding, what can I do?
First make sure the handle seal is fully seated onto the handle. Then make sure you are running the pump with the pointed handle up. If it continue to extend, please email us at email@example.com and we can help!
Where is and how do I remove the CO2 inflator head from the pump?
The inflator head of the pump (the anodized green part) doubles as an inflator head, simply unthread it from the pump and you can thread your CO2 right onto it. It can be quite snug from assembly, the first removal may require you use an 8mm hex key to unthread it.
Is this pump compatible with both Presta and Shraeder valves?
This pump is only compatible with Presta valves.
What is the max PSI for these pumps?
This pump is designed for MTB and gravel applications. It will happily get to 50-60PSI. Any pressure beyond that is not practical and we do not recommended this pump for high pressure road applications.
The pump doesn't seem to fit my valve, whats going on?
The pump head fits quite snugly on the valves when new. Be sure you give it a firm & straight push down onto the valve before inflating.