Ensemble de pompe EDC 100cc
Pompe 100cc.
La pompe EDC de 100cc est une pompe à grand volume conçue pour transporter notre système d'outils EDC V2 et notre ensemble de réparation de crevaison et pinces. Sa conception creuse et sa construction en aluminium CNC la rendent ultralégère et durable.
Système d'outils V2.
L'outil EDC V2 à 20 fonctions est le cœur du système de pompe EDC. Ajoutez notre ensemble de réparation de crevaison et pinces EDC au bas du système d'outils EDC ou remplacez l'outil EDC V2 par une cartouche de CO2 vissée dans le capuchon de rangement de la pompe EDC. Ensuite, placez bien le tout dans votre pompe et roulez.
Ensemble de réparation de crevaison et pinces.
L'ensemble de réparation de crevaison et pinces est le complément parfait au système de pompe EDC. L'ensemble complet de pinces, démonte-pneu et bouchons supplémentaires entrent seulement à l'intérieur de la pompe EDC de 100cc. Soyez prêt à tout avec votre pompe EDC.
FAQ
I got the multi tool and pump, why does the tool rattle in the pump?
The multi tool is just one part of a whole. It is designed to be held captive within the EDC tool system. That complete tool can then be inserted into the pump and everything will be held nice, quiet and compact. Here is a link to the complete EDC tool system.
Do you sell replacement pump straps?
Yes! We have three packs of pump mount straps available in the EDC small parts section of the website.
Why is the tool hard to remove form my pump?
It is likely that the top O-ring is dry. Best thing to do is rub a small amount of grease onto the o-ring and re-install it. If that does not help, please email us at support@oneupcomponents.com.
What is the max the pump mount can be spaced from the bolt? WIll this fit my Wide down tube?
The pump mount has a max extension of 30mm from the center of the mounting bolts.
My pump handle is extending while riding, what can I do?
First make sure the handle seal is fully seated onto the handle. Then make sure you are running the pump with the pointed handle up. If it continue to extend, please email us at support@oneupcomponents.com and we can help!
Where is and how do I remove the CO2 inflator head from the pump?
The inflator head of the pump (the anodized green part) doubles as a CO2 inflator head, simply unthread it from the pump and you can thread your CO2 right onto it.
It can be quite snug from assembly, the first removal may require you use an 8mm hex key to unthread it.
Is this pump compatible with both Presta and Shraeder valves?
This pump is only compatible with Presta valves.
What is the max PSI for these pumps?
This pump is designed for MTB and gravel applications. It will happily get to 50-60PSI. Any pressure beyond that is not practical and we do not recommended this pump for high pressure road applications.
The pump doesn't seem to fit my valve, whats going on?
The pump head fits quite snugly on the valves when new. Be sure you give it a firm & straight push down onto the valve before inflating.
